Jar Labeling Machine Guide: How It Works, Jar Sizes and Options
A jar labeling machine puts self-adhesive labels on jars while they move along a conveyor: a wrap-around label on round jars, front and back labels on flat or square jars, or a label on top. This guide explains how the machine works, which jar and label sizes it takes, and what to decide before you ask for a quote. The figures come from our two models, the SVJSL 50 and SVJSL 100 automatic jar labeling machines.
How a jar labeling machine works
- Feeding: jars go onto the slat chain conveyor by hand, from a rotary turntable or straight from the filling and capping line.
- Spacing: a separator with its own speed-controlled motor opens a gap between jars, so each jar reaches the label head on its own.
- Detection: a sensor sees the jar arrive. No jar, no label: the dispenser waits instead of wasting a label.
- Dispensing: the PLC tells the stepper or servo motor to feed one label. The machine measures the label length itself, so a new label size needs no manual setting of the length.
- Pressing: a sponge belt rolls the jar and presses the label down from edge to edge while the conveyor carries it on to the next station.
Dispenser, conveyor and pressing belt run in sync, so the line speed is changed in one place on the touch screen and the whole machine follows. A counter keeps track of the jars labeled.
Which jars fit: SVJSL 50 or SVJSL 100
| SVJSL 50 | SVJSL 100 | |
|---|---|---|
| Output | up to 50 labels a minute | up to 100 labels a minute |
| Round jars, diameter | 30–90 mm | 30–150 mm |
| Square jars, side | 25–80 mm | 25–120 mm |
| Jar height | 30–280 mm | 30–280 mm |
| Label dispenser motor | stepper or servo | servo |
| Power | 1.0 kW, 230 V single phase | 1.5 kW, 230 V single phase |
| Machine size (L × W × H) | 2000 × 1450 × 1400 mm | 2500 × 1450 × 1400 mm |
Output depends on the label length. Jars outside these ranges, and other power supplies, can be built to order. Within its range one machine takes different round jar and label sizes without change parts.
Check your label roll before you order
- Label height: 12–200 mm.
- Gap between labels on the roll: at least 3 mm, so the sensor can find the start of each label.
- Roll: 76 mm core, up to 300 mm outside diameter.
- Clear labels: the standard sensor reads paper and opaque film. Transparent labels need the transparent label sensor option.
- Accuracy: labels stop within ±1 mm.
Send a sample roll or the label drawing with your enquiry, so the machine can be matched to it.
Wrap-around, front and back, or top labels
- Round jars (honey, jam, pickle, cream): one wrap-around label, full or partial. See labeling machines for honey jars.
- Square or flat-sided jars: a label on the front and one on the back in the same pass. See front and back labeling.
- Lids: a label on top of the cap or lid, on the top and bottom labeling machine.
Glass and plastic jars are labeled the same way; what decides the machine is the jar’s diameter, height and shape.
Options for food and pharma jars
- Batch code printer: prints a batch code, barcode or 2D code on the label as it is applied.
- Missing label check: the machine stops with an alarm, or a pneumatic pusher takes the unlabeled jar off the line.
- Vision inspection: a camera checks each label online and rejects faulty jars.
- Label roll empty alarm and jam sensors at in-feed and out-feed: the machine stops with an alarm when the roll runs out or jars jam.
- Tower light: shows the machine status at a glance.
- Safety cabinet: closes the labeling area for hygiene and operator safety.
The frame is stainless steel 304 and anodized aluminium, built as a GMP model, with a touch screen and the control panel built in.
Before you ask for a quote
- Jar samples or drawings: diameter, height, shape, glass or plastic.
- Label size and material, and whether the labels are clear.
- Where the label goes: wrap-around, front and back, or top.
- The output you need, and the speed of your filling and capping line.
- Anything printed on the label, such as batch codes or barcodes.
- The power supply at your factory.
Siddhivinayak Engineering builds labeling machines in Ahmedabad, is ISO 9001:2015 registered and has supplied machines to more than 30 countries. Send your jar and label details through the inquiry form, or read how to choose a sticker labeling machine for other container types.
FAQs
How many jars a minute can a jar labeling machine label?
Up to 50 labels a minute on the SVJSL 50 and up to 100 on the SVJSL 100. The real figure depends on the label length and the jar size.
Can one machine label different jar sizes?
Yes, within its range: 30–90 mm diameter on the SVJSL 50 and 30–150 mm on the SVJSL 100, for jars 30–280 mm tall. Round jar and label sizes change without change parts.
Can it print the batch number on the label?
Yes, with the batch code printer option. It prints a batch code, barcode or 2D code on each label while it is applied.
Does it work with clear labels?
Yes, with the transparent label sensor option. Without it the machine reads paper and opaque labels.








